|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$133.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$109.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$109.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$124.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Nylon
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 55 Hub |
|
|
|
|
|
|
|
|
|
|
|
$17.22 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$132.45 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Sprint Inboard |
|
300-9366 |
300-10156 |
|
|
|
|
|
|
|
|
$318.60 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 80-87 GM G-Body |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.02
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Granada |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$157.50 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 2.97
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 55-57 Chevy |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$148.50 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 6 x 5.32
;
Mount Type: Hat
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Steel
|
Truck
|
Truck Drawing
|
Truck Side-View Drawing
|
Wilwood's heavy duty truck hubs are a direct replacement for the OE application. Hubs come ready to install and include studs, bearing and retaining ring.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 2004-UP Ford F150 |
|
|
|
|
|
|
|
|
|
|
|
$323.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Steel
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 55 Hub |
|
|
|
|
|
|
|
|
|
|
|
$9.66 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 4.12
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.19
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Early Ford |
270-2158 |
300-3307 |
300-3099 |
370-1560 |
370-1561 |
1.19 |
N-A |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.38
Outer Bearing I.D.: 0.688
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Vega |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-1238 |
370-1239 |
0.688 |
A1 |
$155.46 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$131.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 2.93
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 87-93 Mustang |
270-2158 |
300-3307 |
300-3099 |
370-2571 |
370-2609 |
1.38 |
A5 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-0374 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$115.95 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 64-74 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55 - Dynamic
|
Wide 5 - Starlite 55 - Dynamic Drawing
|
Wide 5 - Starlite 55 - Dynamic Side-View Drawing
|
Starlite 55 Dynamic Mount hubs are specifically designed for use with dynamic mount rotor adapters. Dynamic mounting benefits include: moderating heat related distortion and run out of rotors in high temperature asphalt racing. Based on the lightweight 5-bolt drive flange design or lighter snap-cap fronts, Starlite hubs demonstrate superior strength from permanent mold, high-density aircraft aluminum construction.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$123.45 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 80-87 GM G-Body |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$125.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 80-87 GM G-Body |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$157.50 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 55 Hub |
|
|
|
|
|
|
|
|
|
|
|
$59.99 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$124.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 64-74 Chevy |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 79-81 Camaro |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 4.12
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.19
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Early Ford |
270-2158 |
300-3307 |
300-3099 |
370-1560 |
370-1561 |
1.19 |
N-A |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55 - Dynamic
|
Wide 5 - Starlite 55 - Dynamic Drawing
|
Wide 5 - Starlite 55 - Dynamic Side-View Drawing
|
Starlite 55 Dynamic Mount hubs are specifically designed for use with dynamic mount rotor adapters. Dynamic mounting benefits include: moderating heat related distortion and run out of rotors in high temperature asphalt racing. Based on the lightweight 5-bolt drive flange design or lighter snap-cap fronts, Starlite hubs demonstrate superior strength from permanent mold, high-density aircraft aluminum construction.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$139.95 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pro Street Hub Cap |
|
|
|
|
|
|
|
|
|
|
|
$37.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-69 Mustang |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.02
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Granada |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$157.50 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Sprint Inboard |
|
300-9366 |
300-10156 |
|
|
|
|
|
|
|
|
$318.60 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55XD
|
Wide 5 - Starlite 55XD Drawing
|
Wide 5 - Starlite 55XD Side-View Drawing
|
Starlite 55-XD hubs elevate performance and versatility for racing applications that require uncompromised strength without excessive additional weight. At just over 7 pounds, the 55-XD achieves it superior strength and modest weight through a highly efficient redesign of racing’s most popular wide 5 hub, the Starlight 55. The 55-XD employs a bolt-on rotor mount plate that adds overall strength by eliminating the brake torque loading from the main hub body, by taking the stress loads of the braking torque out of the hub body and moving it to the thicker, stronger section of the hub near the inner wheel bearing, provides a measurable decrease in stress deflection in the body.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
300-11211 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$215.94 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55XD
|
Wide 5 - Starlite 55XD Drawing
|
Wide 5 - Starlite 55XD Side-View Drawing
|
Starlite 55-XD hubs elevate performance and versatility for racing applications that require uncompromised strength without excessive additional weight. At just over 7 pounds, the 55-XD achieves it superior strength and modest weight through a highly efficient redesign of racing’s most popular wide 5 hub, the Starlight 55. The 55-XD employs a bolt-on rotor mount plate that adds overall strength by eliminating the brake torque loading from the main hub body, by taking the stress loads of the braking torque out of the hub body and moving it to the thicker, stronger section of the hub near the inner wheel bearing, provides a measurable decrease in stress deflection in the body.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
300-11211 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$232.44 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 4 x 4.25
;
Mount Type: Hat
Bearing O.D. Length (M): 3.142
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.125
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Sunbeam Tiger |
270-2158 |
|
|
370-11758 |
370-1236 |
1.125 |
A21 |
370-0876 |
370-0877 |
0.75 |
A2 |
$142.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.75
; 5 x 5.00
Mount Type: Adapter
Bearing O.D. Length (M): 3.696
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.3775
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 49-54 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.3775 |
A13 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.145
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
NULLForged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| AMC |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.145
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-68 Impala |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.12
Outer Bearing I.D.: 0.8437
Inner Bearing I.D.: 1.375
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 69-70 Impala |
270-2158 |
300-3307 |
300-3099 |
370-2571 |
370-2609 |
1.375 |
A5 |
370-9245 |
370-9542 |
0.8437 |
A3 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 80-87 GM G-Body |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.21
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Classic Performance Products Spindle (Impala Drop) |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 5 Hub |
|
|
|
|
|
|
|
|
|
|
|
$55.28 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 5 Hub |
|
|
|
|
|
|
|
|
|
|
|
$55.28 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 64-74 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$115.95 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 64-74 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 55 Hub |
|
|
|
|
|
|
|
|
|
|
|
$72.75 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-78 Camaro |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$131.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Sprint Inboard |
|
300-9366 |
300-10156 |
|
|
|
|
|
|
|
|
$147.00 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pro Street Hub Cap |
|
|
|
|
|
|
|
|
|
|
|
$25.86 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pro Street Hub Cap |
|
|
|
|
|
|
|
|
|
|
|
$29.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$125.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-73 Mustang |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$116.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 55 Hub |
|
|
|
|
|
|
|
|
|
|
|
$7.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Midget Inboard |
|
300-9366 |
|
|
|
|
|
|
|
|
|
$318.60 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.07
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 55-57 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 5.00
;
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$142.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 5 - Dynamic
|
Wide 5 - Starlite 5 - Dynamic Drawing
|
Wide 5 - Starlite 5 - Dynamic Side-View Drawing
|
Starlite 5 Dynamic Mount hubs are specifically designed for use with dynamic mount rotor adapters. Dynamic mounting benefits include: moderating heat related distortion and run out of rotors in high temperature asphalt racing. Based on the traditional eight-bolt drive flange design, Starlite hubs demonstrate superior strength from permanent mold, high-density aircraft aluminum construction.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-0374 |
|
300-8431 |
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$123.45 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 79-81 Camaro |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
; 5 x 10.25
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Hub |
|
|
|
|
|
|
|
|
|
|
|
$93.18 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 5 Hub |
|
|
|
|
|
|
|
|
|
|
|
$55.28 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Midget Inboard |
|
300-9366 |
|
|
|
|
|
|
|
|
|
$147.00 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$148.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 5
|
Wide 5 - Starlite 5 Drawing
|
Wide 5 - Starlite 5 Side-View Drawing
|
Starlite hubs remain as the oval track benchmark standard. Based on the traditional eight-bolt drive flange design, Starlite hubs demonstrate superior strength from permanent mold, high density aircraft aluminum. The close tolerance castings are precision machined to assure consistent fit, strength, and durability. Over the years, this innovative hollow core design has been refined and is race proven. Wilwood's high volume, quality assured manufacturing capability has made it both racing tough and economical.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-0374 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$103.14 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-6913 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$140.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 2.93
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 87-93 Mustang |
270-2158 |
300-3307 |
300-3099 |
370-2571 |
370-2609 |
1.38 |
A5 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Steel
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 5 Drive Flange |
|
|
|
|
|
|
|
|
|
|
|
$5.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Direct
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Magnesium
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Sprint Inboard |
|
|
|
|
|
|
|
|
|
|
|
$259.14 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 79-81 Camaro |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0881 |
370-0933 |
0.844 |
A34 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 5.00
;
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$142.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 5
|
Wide 5 - Starlite 5 Drawing
|
Wide 5 - Starlite 5 Side-View Drawing
|
Starlite hubs remain as the oval track benchmark standard. Based on the traditional eight-bolt drive flange design, Starlite hubs demonstrate superior strength from permanent mold, high density aircraft aluminum. The close tolerance castings are precision machined to assure consistent fit, strength, and durability. Over the years, this innovative hollow core design has been refined and is race proven. Wilwood's high volume, quality assured manufacturing capability has made it both racing tough and economical.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-0374 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$103.14 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Race Steering Quick Disconect |
|
|
|
|
|
|
|
|
|
|
|
$26.99 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-78 Camaro |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.71
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 62-72 B Body Drum |
270-2158 |
|
|
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$142.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 2.97
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 55-57 Chevy |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 2.93
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 87-93 Mustang |
270-3150 |
|
|
370-2571 |
370-2609 |
1.38 |
A5 |
370-0881 |
370-0882 |
0.866 |
A12 |
$179.99 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Steel
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Starlite 5 Hub |
|
|
|
|
|
|
|
|
|
|
|
$8.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle:
;
Mount Type:
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Race Steering Quick Disconect |
|
|
|
|
|
|
|
|
|
|
|
$26.99 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 10.25
;
Mount Type: Direct
Bearing O.D. Length (M): 4.6
Outer Bearing I.D.: 1.813
Inner Bearing I.D.: 2
Material: Aluminum
|
Wide 5 - Starlite 55
|
Wide 5 - Starlite 55 Drawing
|
Wide 5 - Starlite 55 Side-View Drawing
|
Starlite "55" hubs provide the superior strength of permanent mold, high-density aircraft aluminum at weights comparable to the much higher priced magnesium hub assemblies. The Starlite "55" features the strength of our traditional Starlite hub, but redesigned to eliminate unnecessary weight in the hub and its related components. 5 bolt Drive flanges and snap-cap front hubs pare the 'loaded' weight of these hubs to being the lightest available.
INSTALLATION NOTE:
Hub contains drilled & lightened wheel studs. Use with caution. Check for legality with your sanctio
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Wide 5 Spindle |
270-9498 |
|
|
370-0314 |
370-0431 |
2 |
N-A |
370-0315 |
370-0432 |
1.813 |
N-A |
$116.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 5.00
;
Mount Type: Hat
Bearing O.D. Length (M): 3.57
Outer Bearing I.D.: 0.844
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs for the C10 Pickup are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. C10 hubs are intended for use with used with aluminum mounting hats. C10 Hubs are single drilled in a 5 on 5.00" wheel lug pattern. Hubs include bearing races. Uses a press in bearing cap, available separately.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Chevy C-10 |
370-10763 |
|
|
370-2571 |
370-2609 |
1.38 |
A5 |
370-9245 |
370-9542 |
0.844 |
A3 |
$169.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-78 Camaro |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 4 x 4.25
;
Mount Type: Hat
Bearing O.D. Length (M): 2.93
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 87-93 Mustang |
270-3150 |
|
|
370-2571 |
370-2609 |
1.38 |
A5 |
370-0881 |
370-0882 |
0.866 |
A12 |
$179.99 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 2.97
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-75 A Body 10" Drum |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 2.97
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-75 A Body 10" Drum |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 2.95
Outer Bearing I.D.: 0.688
Inner Bearing I.D.: 1.063
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-72 A Body 9" Drum |
270-2158 |
300-3307 |
300-3099 |
370-3146 |
370-3147 |
1.063 |
A4 |
370-1238 |
370-1239 |
0.688 |
A1 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 2.95
Outer Bearing I.D.: 0.688
Inner Bearing I.D.: 1.063
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-72 A Body 9" Drum |
270-2158 |
300-3307 |
300-3099 |
370-3146 |
370-3147 |
1.063 |
A4 |
370-1238 |
370-1239 |
0.688 |
A1 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 3.73
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 73-76 A Body Disc |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.7
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 73-76 A Body Disc |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 3.74
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 62-72 B Body Drum |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Direct / Adapter
Bearing O.D. Length (M): 3.7
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Solid Rotor Offset
|
Hub - Solid Rotor Offset Drawing
|
Hub - Solid Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Solid Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 4.75" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub is intended for use with rotor mounting adapters. Can also be used as hat mount hub.
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 62-72 B Body Drum |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.13
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-73 Mustang |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.15
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-9380 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.13
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 70-73 Mustang |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$131.70 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 3.14
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Pinto / Mustang II |
270-2158 |
300-3307 |
300-3099 |
370-0883 |
370-0884 |
1.378 |
A13 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Adapter
Bearing O.D. Length (M): 2.93
Outer Bearing I.D.: 0.866
Inner Bearing I.D.: 1.38
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 87-93 Mustang |
270-2158 |
300-3307 |
300-3099 |
370-2571 |
370-2609 |
1.38 |
A5 |
370-0881 |
370-0882 |
0.866 |
A12 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Midget Inboard |
|
300-9366 |
|
|
|
|
|
|
|
|
|
$147.00 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 3.74
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 62-72 B Body Drum |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 2.95
Outer Bearing I.D.: 0.688
Inner Bearing I.D.: 1.063
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 65-72 A Body 9" Drum |
270-2158 |
300-3307 |
300-3099 |
370-11554 |
370-11555 |
1.063 |
N-A |
370-1238 |
370-1239 |
0.688 |
A1 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.50
; 5 x 4.75
Mount Type: Hat
Bearing O.D. Length (M): 3.73
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.378
Material: Aluminum
|
Hub - Hat Mount
|
Hub - Hat Mount Drawing
|
Hub - Hat Mount Side-View Drawing
|
Forged Billet Hat Mount Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with used with aluminum mounting hats for Hubs are either single or double drilled from 5 on 4.50" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
Hub contains 3 qty 1/4-20 holes for hat retention. Use bolt kit 230-7032 to retain hats drilled for
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 73-76 A Body Disc |
270-2158 |
|
|
370-0883 |
370-0884 |
1.378 |
A13 |
370-0876 |
370-0877 |
0.75 |
A2 |
$142.43 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: 5 x 4.00
; 5 x 4.50
Mount Type: Adapter
Bearing O.D. Length (M): 2.97
Outer Bearing I.D.: 0.75
Inner Bearing I.D.: 1.25
Material: Aluminum
|
Hub - Vented Rotor Offset
|
Hub - Vented Rotor Offset Drawing
|
Hub - Vented Rotor Offset Side-View Drawing
|
Forged Billet Aluminum Vented Rotor Offset Hubs are made from premium grade alloy billets are forged into shape under high heat and pressure, then CNC machined for precise fit on each spindle application. Intended for use with intermediate adapter plates, but can also be used with aluminum mounting hats for custom applications. Hubs are either single or double drilled from 5 on 4.00" up 5 on 5.00" wheel lug patterns depending on part number. Hubs include bearing races and screw-on aluminum caps.
INSTALLATION NOTE:
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| 73-76 A Body Disc |
270-2158 |
300-3307 |
300-3099 |
370-0878 |
370-0879 |
1.25 |
A6 |
370-0876 |
370-0877 |
0.75 |
A2 |
$134.93 |
|
Call (805) 388-1188 |
|
|
|
Wheel Bolt Circle: Splined
;
Mount Type: Adapter-Dynamic
Bearing O.D. Length (M):
Outer Bearing I.D.:
Inner Bearing I.D.:
Material: Aluminum
|
|
|
|
Hub Application Note:
|
|
Rotor Adapters
|
Inner Races & Bearings
|
Outer Races & Bearings
|
Ordering Information
|
| Common Application Note |
Dust Cap |
6 Bolt:
(6 x 6.25) |
8 Bolt:
(8 x 7.00) |
Inner Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Outer Race |
Bearing |
Bearing I.D. |
MFG Set No. |
Price |
Product Number |
Purchase Information |
| Midget Inboard |
|
300-9366 |
|
|
|
|
|
|
|
|
|
$318.60 |
|
Call (805) 388-1188 |
|
|